High Quality High Density Polyethylene Raw Material HDPE

• Feature: Biodegradable
• Formula: CB6942706
• Material: High Density Polyethylene/HDPE
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Injection
• Model NO.: DONGFANG
• Color: White
• Grade: Raw Granules Resins
• Shape: Granuels
• Appearance: Natural White Granule
• Sample: Availiable
• Transport Package: Nano Calcium Carbonate 25 Kgs/Compound Bags or 1 T
• Specification: 99%
• Trademark: DONGFANG
• Origin: China
• HS Code: 3901100090
• Production Capacity: 5000 Ton/Tons Per Week

Product Description

High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material.

Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature.

HDPE Feature
Polymer; Thermoplastic; Polyethylene (PE); High Density (HDPE)
The crystallinity is 80% to 90%, the softening point is 125 to 135°C, and the service temperature can reach 100°C; the hardness, tensile strength and creep are better than those of low-density polyethylene; abrasion resistance, electrical insulation, toughness and Good cold resistance; good chemical stability

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm³	0.941-0.959
Melt flow Rate(190 Centigrade /2.16kg)	g/10min	≤1.0
Tensile yield strength	MPa	≥19.0
Flexural modulus	Mpa	≥965
Elongation@ break	%	≥400
Impact Embrittlement temperature	Centigrade	MAX -118
Dielectric Constant	100KHZ	2.32
	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15