Appearance: | Clear Purple Liquid |
---|---|
Usage: | Normal Fiber Reinforced Plastic Products |
Application: | FRP, Poly Button |
Purity: | High |
Mf: | C16h30coo4 |
Einecs No: | 205-250-6 |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Product descriptio
Cobalt isocrylate is purple liquid, mainly used as paint, ink drying agent, unsaturated polyester resin curing promoter, polyvinyl chloride stabilizer, polymerization reaction catalyst.
Gel time (25 ºC):≤ 5 min
Appearnce : clear purple liquid
Density (25 ºC): 0.900-0.922g / min
Resin casting body color: original color
Storage
The product will have some loss in weight after stored for a period of time. In order to minimize the loss in weight,Thousands Chemical recommends the highest storage temperature (Ts max.) for each product.
TC-Accelerator E | Maximum storage temperature= |
Minimum storage temperature= |
When stored under the recommended conditions, TC-Accelerator E will remain within the specifications of the Thousand Chemicals product for at least 6 months after delivery.
Safety and operation
Keep the container closed, store and handle TC-Accelerator E in a dry, well-ventilated place away from sources of heat or ignition and direct sunlight.
It is forbidden to weigh and pack in the storage room.
The accelerator and the organic peroxide-based curing agent are forbiddened to be directly mixed in any case. If it directly contact with organic peroxides such as methyl ethyl ketone peroxide curing agent, a violent explosion reaction will occur, which will cause bad consequences. Therefore, the curing agent should be added to the resin first, stir well, then add the accelerator, stir evenly, then use.For more information about the safe storage, use and handle of TC-Accelerator E, please refer to the Safety Data Sheet (MSDS). You should read the relevant safety information on the MSDS carefully before use this product.
Application
This product is the best light color accelerator for unsaturated polyester resin cured at room temperature. Usually it is used with a peroxide-inducing agent such as cyclohexanone peroxide or methyl ethyl ketone, the amount is generally about 0.5% to 2.5% of the resin.It is widely used in FRP, Polyester polywood, polyester household, artificial agate, polyester buttons, casting process, etc.
Suppliers with verified business licenses